EditRegion6

Wired Ethernet NMEA 2000™ Protocol Gateway

Download Ethernet Specifications (PDF)

High Resolution Image

Plug and Play Wired NMEA 2000™ and NMEA 0183™ compatible interface module consists of a USB/Serial gateway, 100Base-TX Ethernet and built in CGI/AJAX web server.  Compatible with most browser enabled devices such Smart Phones, iPhone, iPad, and Android, SeaSmart.Net™ allows users to view NMEA 2000™ and 0183 serial data via integrated web pages eliminating add-on license fees. Open Sourced HTML Protocol allows simple customization to fit any application from weather station, dual engines, battery banks, fluid tanks and more. Now view all gauges, switch positions and GPS information from any browser enabled device.

SeaSmart.net will allow internet based applications to directly access NMEA 2000 and NMEA 0183 data over TCP/UDP connections. Now view vessel information from anywhere. Also supports AIS information via on-board receivers.

SeaSmart.Net™ innovative interface technology includes an embedded Ethernet module to directly support both infrastructure and Ad Hoc networks without additional equipment. SeaSmart.net firmware translate native NMEA 2000 protocol to compatible HTML pages which are automatically updated Live and feed to the embedded web server. CGI and AJAX protocols allow JavaScript Web Browsers to view the dynamic graphics with minimum network loading so that performance is maintained over Dial-Up and Cell based networks. The Open Protocol allows for license free viewing of vessel data equal to other helm station displays and is easily shared among other devices. This data can be logged and viewed on vessel based systems or pushed to internet based remote servers for access anywhere in the world.

ethernet marine networking map

 

Chetco Digital SeaSmart.Net™ technology makes wireless gauge viewing, data access and data storage as easy as using a smart phone and browser. SeaSmart ENet is bundled with sample Web Pages for instant setup. Custom development tools are also included.

 

Technical Specifications

{ new PGNs added weekly - please call for updates }

 

PGN
TYPE
HTTP Header
Parameters
126992
System Time
$PCDIN,01F010
3
127250
Vessel Heading
$PCDIN,01F112
3
127251
Rate Of Turn
$PCDIN,01F113
2
127257
Attitude
$PCDIN,01F119
3
127488
Engine Parameter, Rapid
$PCDIN,01F200
3
127489
Engine Parameter, Dynamic
$PCDIN,01F201
9
127493
Transmission Parameters
$PCDIN,01F205
3
127501
Binary Switch Status
$PCDIN,01F20D
4
127502
Switch Bank Control
$PCDIN,01F20E
4
127505
Fluid Level
$PCDIN,01F211
3
127508
Battery Status
$PCDIN,01F214
3
130306
Wind Data
$PCDIN,01FD02
2
130311
Environmental Parameters
$PCDIN,01FD07
2
130312
Temperature
$PCDIN,01FD08
2
130323
Meteorological Station
$PCDIN,01FD13
7
129026
GPS COG & SOG
$PCDIN,01F802
2

 

Operating Voltage: 9 to 14.5 Volts DC Voltage
Power Consumption: <450mA Average Current Drain
Load Equivalence Number: 9 NMEA 2000® Spec. (1LEN = 50 mA)
Reverse Battery Protection: Yes Indefinitely
Load Dump Protection: Yes Energy Rated per SAE J1113
Size: 4” x 2” x 2” Including Flanges for Mounting Weigh 8 oz. (340 g)
NMEA 2000® Connector: DeviceNet Micro-C via 24” cable drop (4 pin Conxall)
NMEA 2000® Isolation: Opto-Isolated No Electrical Connection Across Bridge
Interface Standard: RS232 Serial/USB 1.1
USB Connector: 8-pin Conxall to USB Type A -5’ cable drop
USB Auxiliary Power: +5 Volts < 200 mA
RS232 Connector: 8-pin Conxall to DB9 Connection to PC – 5’ cable drop
Power Connector: 2-pin Conxall to 3’ pigtail (12V/GND)Ethernet Interface:  10Base-T and 100Base-TxEthernet Connector:    RJ45 with LED indicators
Operating Temperature: -25°C to 55°C
Storage Temperature: -40°C to 70°C
Relative Humidity: 93%RH @40° per IEC60945-8.2

Download Ethernet Specifications (PDF)

marine-ethernet-networking-nmea2000-wireless

 

 

10% show discount this week

Fort Lauderdale Boat Show 2014

Sail Fish Tent 4188

Oct 30 - Nov 3 2014

 

New for 2014!

SeaSmart-SDL

Store Data directly to SD memory and upload to the Cloud


On the Horizon

SeaSmartPro - WiFi Gatway with direct sensor inputs